Details
40-2000A-IR | HDMI Extender with IR Over Single Cat5e/ Cat6 Cable - Sold as a Pair
The 40-2000A-IR balun provides a single UTP category 5e/6 cable solution to deliver pristine digital signals from all HDTV formats and signal sources from 480p to 1080p@60Hz. Balun technologies are perfect solutions for replacing a standard HDMI cable that is limited to much shorter distances and difficult to route thru walls and cabinets. Balun technology also offers many advantages when HDTV video technology changes by installing newly updated video baluns with the latest technology. This balun provides bidirectional IR control with independent IR RX and IR TX jacks.
Technical Notes:
Works with UTP 568A (End to End) or 568B (End to End) wiring formats.
Specifications:
HDCP Compliant: Yes
HDMI: Ver 1.4
HDTV Resolutions:
Cat5e 62M (200 ft. max) 480i/p, 720p, 1080i
Cat5e 33M (110 ft. max) up to1080P
Cat6 50M (164 ft. max)@1080p @ 24/50/60Hz
Digital Audio: Dolby TrueHD, DTS-HD Master Audio
Connectors: (Transmitter, Receiver):
1 x 19 pin HDMI Female Jack, 1 x RJ45 Shielded Jack,
1 x 2.1mm DC Coax Power jack, each unit,
1 x 3.5mm IR RX jack, 1 x 3.5mm IR TX jack
DC Power Supply: 2 x 12V, 1 Amp Regulated
IR Receivers: 1 x Receivers
IR Transmitters: 1 x Non Flashing Emitters
Weight: Transmitter: 235g/ Receiver: 235g
Balun Transmitter: L-3.12” x W-2.68” x H-.65”
Balun Receiver: L-3.12” x W-2.68” x H-.65”
EDID Settings: On Transmitter Side Only (2 PIN DIP Switch)
DIP Settings: On Receiver Side Only (3 PIN DIP Switch)
Chassis Color: Black
Please Note!
Some distances may vary and are dependent on the manufacturer's individual HDMI specifications. All products should be fully tested prior to committing to a UTP Cat5e, Cat6 solution and sealing long runs of cables inside walls, possibly compromising your installation.