95 Series
Security Systems & Accessories

For Further Information Contact Calrad at 323-465-2131 or E-mail us at: calradelectronics@calrad.com

95-945 ALARM CONTROLPANEL
The 95-945 is our simplest and most reliable control panel. It is ideal for residential and commercial applications alike. This electronic burglar alarm system is equipped with many features found only on more expensive models. The following features are standard on the 95-945 alarm control panel.

AC/DC with regulated power supply and 7 Amp-Hour rechargeable gell battery
Normally open and closed instant circuits
Normally open and closed delay circuit
Entrance delay timer adjustuble from 10 to 60 seconds
Pre-alarm output connections
Built-in bell cutoff timer (adjustable and recycle)
LED indicators for AC, Arm Mode, and Loop Status

95-6000 & 95-8000 6 & 8 ZONE ALARM SYSTEMS The 95-6000 (6-zone) and 95-8000 (8-zone) are Calrad's newest addition in state-of-the-art security systems. Both come complete with utility cabinet, power transformer and digital keypad. The digital keypad is also available separately for use in other applications. Both systems are easy to install and use.
Keypad Features Bypass by zone. Selectable instant delay. System test. 8-user changeable access codes. Abbreviated arming. Annunciator/chime mode by zone by keypad. Keypad audible feedback selectable. Selectable bypass enable. Keypad programming allows review off selected data. Selectable mini-sounder. Duress. Simultaneous display of loop status & armed status. Alarm memory by zone.
Panel Features Multi-premise operation. Lock-out. Auto bell shutoff/reset EE PROM technology. Built-in gas discharge tube. Auto smoke detector reset (95-8000). Two. year warranty. Transient & lightening protection.
Communicator Features Status reporting. Dial-tone detection. Acron SUPERFAST reporting. Silent Knight 4 + 2. Slow/fast standard reporting. Auto handshake recognition. Standard or European dialing. Touch-Tone or Rotary dialing. Extended reporting. Hexadecimal reporting. DPDT line seizure. Programmable dialing pause. Programmable reporting delay. Operator intercept rejection.
Specifications
Power Requirements Bell outputs Auxiliary Output Transient & Lightning Protection Zone Response Time Zone Loop Maximum Resistantce FCC Registration Number Ringer Equivalence Cabinet Lock Dimensions Shipping Weight	120 Vac, 20 VA, 16.5 V transformer supplied / 12 V battery rechargeable gel type not supplied Burglary and fire outputs 12 Vdc, total current not to exteed 2.0 Amps 12Vdc, regulated 600mA Lightning & surge protection provided on all inputs power and phone line 220 m Sec. / During reporting cycle response time increases to 1 Sec 300 Ohms (not induding EOL resistor) AB798Z-67793-AL-E 0.1B Supplied 95-6000 - 8 1/4" H x 11" W x 3" D 95-8000 -13" H x 10 3/4" W x 2 3/4" D 95-6000 - 6 Ibs. / 95-8000 -10 Ibs

95-817 DIGITAL KEYPAD
This keypad is used for more-than-one-location or Multiuser applications. Used with the Calrad 95-6000 and 95-8000 alarm systems.
Specifications
Voltage..................................8-16 Vdc
Hook-up................................4- Wire
Mini-sounder..........................Built-in
Feedback...............................Tactile & Audible
SystemCapacity......................5 Keypads
Temp. Operating Range..........35° to 135° F.
Environment............................For indoor use only
Dimensions.............................5.5"x 4.75" x .937"
Shipping.................................Weight 8 oz.

95-868A PASSIVE INFRARED INTRUSION DETECTOR
The 95-868 is the smallest passive infrared (PIR) detector in its class. Aesthetically designed to blend in with any decor. Although it measures just 3 7/8" x 2 3/4" x 1 1/8", its rugged construction provides for reliable and durable service. NORMALLY CLOSED.
Specifications
Sensor Type............................Passive Infrared
Infrared Window.....................Rigid, coated filter
DetectionPattern......................40 x 40 feet
Detection Zones......................12 (8 lookout, 4 lookdown)
Output.....................................Form A Relay, NC
Walk Test Indicator.................LED
Tamper Circuit (6640 only)......N/CSwitch
Color......................................Off White/Beige
Weight....................................3.5 ounces
Mounting.................................Flat surface or corner
Power Requirements
Voltage....................................6-14 Vdc
Current....................................12-28 mA

95-460 IR SENSOR WITH PULSE COUNT
Small compact infrared sensor is perfect for all applications commercial or residential. Stable circuitry for reliable operation. Optional brackets for multi-angle mounting on ceilings or walls. Available in form C relay for normally open, normally closed applications. Tamper switch provided,35' x 35' coverage.

95-899 DELUXE ALARM CONTROL MODULE
Same specifications as the 95-898, but with the added feature of entry/exit time delay circuit. Built-in 3-10 min, adjustable reset timer and sound alert entry reminder. Entry delay loop can be adjusted from 15 to 60 sec. Exit delay is preset at 60 seconds. This entry time delay circuit saves the cost of an outside shunt switch. Also adds to your protection of inside control switching with added nighttime protection while at home. Operates on 6-12 Vdc.

95-898 BURGLAR ALARM MODULE
Versatile, low cost, solid-state control module with full relay power output. Excellent protection for the home, office, apartments, condominiums, etc. Easy to install. Features closed and open circuit loops. Built-in 3 to 11 minute adjustment reset timer. Will automatically reset if protective loop has been closed. The loops may be armed or disarmed anytime by a key switch. Operates on 6-12 Vdc.

95-840 LOW CURRENT RELAY MODULE
To be used when auxiliary relay is needed. DPDT plug-in relay 6 or 12 Vdc, 3 Amp contacts. Mounts with foam tape.

95-914 ELECTRONIC LATCHING RELAY
Momentary input, latching output. Converts old style shunt panel to new multi-key system. Use to shunt an interior loop. Use as a lock-out on commercial systems. 6-12 Vdc, SPDT relay with two (2) LED indicator outputs.

95-847A UNIVERSAL TIMER
This unit can be used for many applications such as a dialer trip delay bell shutdown timer or exit delay.
Features:
1 Sec to 15 Min. adjustable. Relay output (N/C/NO). Low power drain. Transient protected. Voltage reversal protected. Auto reset. Totally enclosed package. Small size.
Specifications
Input Voltage.............................................11to 13 Vdc
Program Time............................................1Sec to 15 Min.
Operating current (Relay activated).............040 amp.
Operating current (Relay de-activated)........010 amp.
Relay Contact Rating - Voltage...................50 Vac/dc
Operating Temperature...............................32° to 100° F.
Dimensions.................................................1 .6" L x 2" W x 1.5" H
Mounting Area............................................3.6 sq. in.
Weight........................................................0.15 Ibs.
Relay Contact Rating - current.....................2amps

95-904
24-HOUR PANIC
& FIRE CONTROL
MODULE By adding this module to either the CALRAD 95-898 95-899 alarms or any other standard control center you can have a 24-hour panic override switching circuit even though your alarm is on or off. When triggered this control will activate either the alarm bell siren or another independent alarm device. May also be used for non-supervised open circuit heat detection.

95-893
POWER SUPPLY 12 VDC,
6 AMP HR. Complete with charger board pluq-in transformer, LEAD-ACID Rechargeable Battery. Fuse Protected. Automatic Full Charge Shutdown. Voltage Reference Indicator. 12 Volt 7 amp hour battery available separately.

95-894
12 VOLT, 7 AMP
BATTERY Sealed rechargeable battery.

95-907
SLIMLINE REMOTE
KEY STATION "D" punched for switch lock with red and green LED indicators, with tamper protection switch 6-12 Vdc.

95-848
DIGITAL CUT-OFF TIMER This unit can turn off a ringing bell or siren, can be used as a delay relay for use as a dry contact switch to delay or remove a contact closure. Requires 6-12 Vdc to operate.
Specifications
Relay Contacts......................3 Amp Max.
Current Drain .......................25 mA
Adjustable Relay Time..........1 sec-10 min.

95-908
REMOTE KEY STATION Remote key station single gang plate features key switch circuit test button and red green indicator LED lights—to be used with 95-898 or 95-899 alarm module.

95-846
DIGITAL TIMER For use with security & gate entry systems, or can be used to control a set of dry contacts with a momentary positive or negative trigger. Time is adjustable from 245 sec. Works with AC or DC power. Built-in LED power indicator.
Specifications
Operating voltage................................12-24 Vac, Vdc
Current consumption relay triggered.....50 ma
Dry contact rating................................3 amps

95-909
SINGLE GANG ALUMINUM PLATE Single gang aluminum plate with "D" hole and red green LED's 6 Vdc or 12 Vdc operation.

95-906
PRESSURE SECURITY MAT Designed to give faultless service, extra thin, made of clear plastic, can be placed under existing rugs, mats, etc. Copper bus is used to connect each segment together and is timed for long use.
Size: 30" Wide x 36" Long.
Custom length available on request.
Normally open.

95-464
DUAL GLASS BREAK DETECTOR This sensor is used to protect areas which conventional sensors that have to be attached to each window, but this unit covers a specific area and uses a dual sensing technology to protect a larger area. The flex audio technology is sensitive to different frequencies. Ultra low and types generated by hard sharp blows to glass windows. The unit remains off until flex technology detects a blow to the glass. For an alarm condition to occur the audio must first detect the frequency of breaking glass within a defined time window. After the flex detects a blow to the glass, because both technologies must detect and verify glass breakage, false alarms are virtually eliminated. Indicator LED's provide visual indicators for various functions.

95-905
SECURITY WINDOW SENSOR
(CLOSE CIRCUIT) Highly sensitive yet extremely stable, uses frequency generated by breaking of glass. Needs no adjusting. Immune to temperature changes, vibrations, mechanical shock and even bending of large glass panels. Will not false alarm like many mechanical window bugs. Does not need pulse stretcher, eliminates the need for window foil. (One per package.)
Features
Operates on 12 Vdc only.
Red LED light indicates sensor is tripped.
Must disconnect power to reset.

95-905A Same as above, but open circuit.

95-920
WINDOW BUG SENSOR Dry circuit, no power required. Protects up to 32 square feet. Adjustable operation for N/O N/C circuit. Automatic reset . Peel and stick mounting. Available in white, brown and gray. Provides good visible deterrent.

95-405
INFRARED DOOR ANNOUNCER This door announcing device emits a continuous, invisible infrared beam to the reflector and returns it to the receiver. When this beam is interrupted it will announce the entrance of the customer by a pleasant chime sound. Single-ended detection technology eliminates the need for a separate transmitter and receiver. An alignment LED is provided for fast and easy installation.
Features
All parts included for easy, complete installation.
Maximum detection range of 35 feet.
Two chime maximum hook-up.
On-Off switch in-line.
U.L. Listed transformer provided.
35 foot length of AWG #22 wire provided.

95-889
ALARM SIREN Operated from 6 to 12 Vdc. Siren is designed to produce a wobble type sound electrically with amplifier contained in housing. Output is approximately 105 dB +-2 dB, 12 Vdc with sound pressure meter 10 ft. away. Rated operating current 0.09 Amp +-0.2 Amp at 12 Vdc.

6 & 8 INCH
ALARM BELLS Produces loud clear ring, will overcome most high background noises. Specify voltage. Current draw .06 Amp.
95-882.......12Vdc, 6 inch
95-883....... 6 Vdc, 6 inch
95 884........24Vdc, 6 inch
95-888.......12Vdc, 8 inch

20-312
SIREN HORN Same unit as 20-310 (shown on page 18) except features built-in siren amplifier. Operates on 6-12 Vdc, our most powerful siren horn, has wiring for both steady and yelp siren operation. Horn Dimensions: 4 3/4" x 8" x 9 1/4" Deep.

95-885
3-lNCH AC BELL Produces loud clear ring. Overcomes high background noises. Operates directly from any output receptacle that produces 117 Vac, 60 cps power source.

95-825
1 1/4" PIEZO SIREN Specifications
Operating Voltage.......6-12 Vdc
Current Drain..............160 mA
0utput Level............... 100 dB
Response Rate............480 cycle/min
Size............................1 3/4" x 1 1/2" x 2 3/8" Deep

95-910 (6V) and 95-911
(12V) 10-INCH BELL Produces loud clear ring, will overcome most high background noises. Used in home, auto factory, school, for fire burglar and most warning devices.

95-826
2 1/2" PIEZO SIREN Specifications
Operating Voltage........6-12 Vdc
Current Drain...............380 mA
Output Level................110 dB
Response Rate.............80 cycle/min
Size.............................3" x 2 3/4" x 4 1/2" Deep

95-900
ELECTRONIC
DUAL BEEPER HORN Produces penetrating continuous or pulsating tone. Will operate on either 6 or 12 Vdc. Used in many alarm warning devices Small in size, mounts into 1 1/8" hole.

95-827
2" PIEZO SIREN Specifications
Operating Voltage......6-12 Vdc
Current Drain..............220 mA
0utput Level................105 dB
Response Rate............80 cycle/min
Size.............................2 1/8" diameter x 1 3/4" Deep

95-902
ELECTRONIC
BEEPER HORN Highly advanced, small in size low in power consumption. Used in many alarm warning devices.
Specifications
Voltage...................2 to 24 Vdc
Power0utput...........3 dB at 12 Vdc
Current...................20 mA max
Size........................fits into 11/16" hole or
mount 1 5/16"centers
Starting...................Voltage1.0V max

95-890
SELF-CONTAINED SIREN SPEAKER High-powered, compact siren speaker. Produces loud, earpiercing warble or steady tone. Operates on either 6 or 12 volts DC and draws only 400 ma of current. Easy-mounting and weather resistant.

95-903A ELECTRONIC
SIREN POWER DRIVER Completely solid-state module produces an extremely loud (130 db) piercing siren sound the instant it is triggered. The drive features two low voltage triggers for either steady or wailing tones. Also a variable rate adjustment for changing the sweep pattern, 6-18 Vdc operation draws 1.7 Amps at 12 Vdc.

95-849
CURRENT SENSOR This easy to install sensor wires directly to any car's alarm system. The sensor is triggered by a current change in the car's electrical system. Sensor provides either positive or negative trigger output. Automatically resets eliminates the need of wiring door's 6-12 Vdc operation.

95-842
AUTOMOTIVE SOUND
DISCRIMINATOR DELUXE MODEL Extremely sensitive to breaking and entering sound, but will not trigger on random external noise. Complete with control to adjust to maximum security External jack provides for remote location of m microphone. 1 2-volt negative ground operation.

95-838
BLINKING INDICATOR LIGHT Easy 3-wire hookup. Wires to all cars, boats, etc. Simulates alarm system present. Cheapest deterrent against theft.

95-841
MEMORY LIGHT CIRCUIT LED will light up after a break-in or when a false alarm has occurred. LED will remain on even after alarm has shut down and reset. Connects to all alarm systems requiring 6-12 Vdc operation, panel mounting.

95-876A
CB ALTERNATOR
AND
AUTO STEREO NOISE ELIMINATOR KIT
7 AMP MODEL RF choke and capacitor design. Helps eliminate unwanted alternator and general ignition noise such as alternator whine, popping caused by plugs or distributor. Easy to install. Complete with instructions.

95-851
GENERATOR-ALTERNATOR
NOISE FILTER A must for CB'ers and Hams- reduces unwanted noise interference caused by auto generator or alternator. Easy to install. Frequency Range: 3 to 30 mcs. Maximum Current: 25 amps.


95-874 & 95-875 PAGING AMPLIFIERS Rugged and versatile public address amplifiers use discrete output drivers for high performance and reliability. These amplifiers are ideal for today's wide sound reinforcement needs. They work on 1 10 Vac or 12 Vdc and music muting is also provided.
Specifications	95-874	95-875
Output Power Muting Level Harmonic Distortion Frequency Response Inputs & Sensitivity S/N Ratio Output Impedance Controls Operating Voltages Dimensions Weight	30 watts music power -20 dB >5% @ full volume 70 -18,000 Hz Mic 1:2mV @ 600 ohm Mic.2:2mV @ 50,000 ohm Aux. 1 & 2: 150mV better than 50 dB 4, 8, 16 ohm, 25 & 70 volt line outputs Mic. 1 & 2: Volume control Aux. & music volume control Tone control 117 Vac (28W) 50/60 Hz 12 Vdc (4A) switched 4.5" H x 10" W x 8.55" D 8.8 Ibs	60 watts music power -20 dB >5% @ full volume 100 -18,000 Hz Mic 1:2mV @ 600 ohm Mic.2:2mV @ 50,000 ohm Aux. 1 & 2: 200mV @ 100K ohm Mic. better than 50dB Aux.: better than 55 dB 4, 8, 16 ohm, 25 & 70 volt line outputs 2 individual Mic. volume controls 2 individual Aux. volume controls Power On-Off, tone control power selector switch 117Vac (58W) 50/60 Hz 12 Vdc (4A) 4.5" H x 10" W x 8.55" D 8.8 Ibs

95-867 15 WATT MOBILE AMPLIFIER
All transistorized, can be used in any 1 2-volt car, truck, boat or place, positive or negative ground. Input is provided for high impedance mike, tape or phono. Output Impedance: 4-8-16 ohms. Supplied with fused battery leads and necessary mounting hardware. Size: 2" H x 4" W x 7 1/2" D.

95-830 POWER AMPLIFIER
This power amplifier is a very versatile high fidelity amplifier and has many useful applications. A few of these are as follows. A power amplifier for the Walkman or similar type of AM/FM stereo headphone radio and be converted into a high powered stereo system for home use. This can easily be done by connecting the headphone output from the radio to the input control of the amplifier. As a power amplifier for the auto, van camper, trailer and boat, or as a portable system for outdoor use. A public address amplifier for both indoor and outdoor.
Specifications
DC Voltage ..........................12 to 1 5V
Input Sensitivity......................0.6V at full output
Frequency Response............. 10 to 25kHz
Power Output...... .................Mono: I SW at 8-ohm.Stereo: 6W
Input Impedance ...................Low Z
Distortion..............................1% @ full output

95-869B 5-WATT AUDIO AMPLIFIER MODULE
Solid-State Audio Amplifier Module with max 5 watt output.
Specifications
Power Supply Voltage...........12-15 V
Frequency Response.............10 to 25 KHz.
Input Impedance ...................Low Z
Input Sensitivity.....................6mv.
Power Input..........................Mono 15 W., 8 Ohms
Distortion .............................1% @ full output

For Further Information Contact Calrad at 323-465-2131 or E-mail us at: calradelectronics@calrad.com

Return to table of contents
You are visitor # to visit this page.

95-904 24-HOUR PANIC & FIRE CONTROL MODULE	By adding this module to either the CALRAD 95-898 95-899 alarms or any other standard control center you can have a 24-hour panic override switching circuit even though your alarm is on or off. When triggered this control will activate either the alarm bell siren or another independent alarm device. May also be used for non-supervised open circuit heat detection.
95-893 POWER SUPPLY 12 VDC, 6 AMP HR.	Complete with charger board pluq-in transformer, LEAD-ACID Rechargeable Battery. Fuse Protected. Automatic Full Charge Shutdown. Voltage Reference Indicator. 12 Volt 7 amp hour battery available separately.
95-894 12 VOLT, 7 AMP BATTERY	Sealed rechargeable battery.
95-907 SLIMLINE REMOTE KEY STATION	"D" punched for switch lock with red and green LED indicators, with tamper protection switch 6-12 Vdc.
95-848 DIGITAL CUT-OFF TIMER	This unit can turn off a ringing bell or siren, can be used as a delay relay for use as a dry contact switch to delay or remove a contact closure. Requires 6-12 Vdc to operate. Specifications Relay Contacts......................3 Amp Max. Current Drain .......................25 mA Adjustable Relay Time..........1 sec-10 min.
95-908 REMOTE KEY STATION	Remote key station single gang plate features key switch circuit test button and red green indicator LED lights—to be used with 95-898 or 95-899 alarm module.
95-846 DIGITAL TIMER	For use with security & gate entry systems, or can be used to control a set of dry contacts with a momentary positive or negative trigger. Time is adjustable from 245 sec. Works with AC or DC power. Built-in LED power indicator. Specifications Operating voltage................................12-24 Vac, Vdc Current consumption relay triggered.....50 ma Dry contact rating................................3 amps
95-909 SINGLE GANG ALUMINUM PLATE	Single gang aluminum plate with "D" hole and red green LED's 6 Vdc or 12 Vdc operation.
95-906 PRESSURE SECURITY MAT	Designed to give faultless service, extra thin, made of clear plastic, can be placed under existing rugs, mats, etc. Copper bus is used to connect each segment together and is timed for long use. Size: 30" Wide x 36" Long. Custom length available on request. Normally open.
95-464 DUAL GLASS BREAK DETECTOR	This sensor is used to protect areas which conventional sensors that have to be attached to each window, but this unit covers a specific area and uses a dual sensing technology to protect a larger area. The flex audio technology is sensitive to different frequencies. Ultra low and types generated by hard sharp blows to glass windows. The unit remains off until flex technology detects a blow to the glass. For an alarm condition to occur the audio must first detect the frequency of breaking glass within a defined time window. After the flex detects a blow to the glass, because both technologies must detect and verify glass breakage, false alarms are virtually eliminated. Indicator LED's provide visual indicators for various functions.
95-905 SECURITY WINDOW SENSOR (CLOSE CIRCUIT)	Highly sensitive yet extremely stable, uses frequency generated by breaking of glass. Needs no adjusting. Immune to temperature changes, vibrations, mechanical shock and even bending of large glass panels. Will not false alarm like many mechanical window bugs. Does not need pulse stretcher, eliminates the need for window foil. (One per package.) Features Operates on 12 Vdc only. Red LED light indicates sensor is tripped. Must disconnect power to reset.
95-905A	Same as above, but open circuit.
95-920 WINDOW BUG SENSOR	Dry circuit, no power required. Protects up to 32 square feet. Adjustable operation for N/O N/C circuit. Automatic reset . Peel and stick mounting. Available in white, brown and gray. Provides good visible deterrent.
95-405 INFRARED DOOR ANNOUNCER	This door announcing device emits a continuous, invisible infrared beam to the reflector and returns it to the receiver. When this beam is interrupted it will announce the entrance of the customer by a pleasant chime sound. Single-ended detection technology eliminates the need for a separate transmitter and receiver. An alignment LED is provided for fast and easy installation. Features All parts included for easy, complete installation. Maximum detection range of 35 feet. Two chime maximum hook-up. On-Off switch in-line. U.L. Listed transformer provided. 35 foot length of AWG #22 wire provided.
95-889 ALARM SIREN	Operated from 6 to 12 Vdc. Siren is designed to produce a wobble type sound electrically with amplifier contained in housing. Output is approximately 105 dB +-2 dB, 12 Vdc with sound pressure meter 10 ft. away. Rated operating current 0.09 Amp +-0.2 Amp at 12 Vdc.
6 & 8 INCH ALARM BELLS	Produces loud clear ring, will overcome most high background noises. Specify voltage. Current draw .06 Amp. 95-882.......12Vdc, 6 inch 95-883....... 6 Vdc, 6 inch 95 884........24Vdc, 6 inch 95-888.......12Vdc, 8 inch
20-312 SIREN HORN	Same unit as 20-310 (shown on page 18) except features built-in siren amplifier. Operates on 6-12 Vdc, our most powerful siren horn, has wiring for both steady and yelp siren operation. Horn Dimensions: 4 3/4" x 8" x 9 1/4" Deep.
95-885 3-lNCH AC BELL	Produces loud clear ring. Overcomes high background noises. Operates directly from any output receptacle that produces 117 Vac, 60 cps power source.
95-825 1 1/4" PIEZO SIREN	Specifications Operating Voltage.......6-12 Vdc Current Drain..............160 mA 0utput Level............... 100 dB Response Rate............480 cycle/min Size............................1 3/4" x 1 1/2" x 2 3/8" Deep
95-910 (6V) and 95-911 (12V) 10-INCH BELL	Produces loud clear ring, will overcome most high background noises. Used in home, auto factory, school, for fire burglar and most warning devices.
95-826 2 1/2" PIEZO SIREN	Specifications Operating Voltage........6-12 Vdc Current Drain...............380 mA Output Level................110 dB Response Rate.............80 cycle/min Size.............................3" x 2 3/4" x 4 1/2" Deep
95-900 ELECTRONIC DUAL BEEPER HORN	Produces penetrating continuous or pulsating tone. Will operate on either 6 or 12 Vdc. Used in many alarm warning devices Small in size, mounts into 1 1/8" hole.
95-827 2" PIEZO SIREN	Specifications Operating Voltage......6-12 Vdc Current Drain..............220 mA 0utput Level................105 dB Response Rate............80 cycle/min Size.............................2 1/8" diameter x 1 3/4" Deep
95-902 ELECTRONIC BEEPER HORN	Highly advanced, small in size low in power consumption. Used in many alarm warning devices. Specifications Voltage...................2 to 24 Vdc Power0utput...........3 dB at 12 Vdc Current...................20 mA max Size........................fits into 11/16" hole or mount 1 5/16"centers Starting...................Voltage1.0V max
95-890 SELF-CONTAINED SIREN SPEAKER	High-powered, compact siren speaker. Produces loud, earpiercing warble or steady tone. Operates on either 6 or 12 volts DC and draws only 400 ma of current. Easy-mounting and weather resistant.
95-903A ELECTRONIC SIREN POWER DRIVER	Completely solid-state module produces an extremely loud (130 db) piercing siren sound the instant it is triggered. The drive features two low voltage triggers for either steady or wailing tones. Also a variable rate adjustment for changing the sweep pattern, 6-18 Vdc operation draws 1.7 Amps at 12 Vdc.
95-849 CURRENT SENSOR	This easy to install sensor wires directly to any car's alarm system. The sensor is triggered by a current change in the car's electrical system. Sensor provides either positive or negative trigger output. Automatically resets eliminates the need of wiring door's 6-12 Vdc operation.
95-842 AUTOMOTIVE SOUND DISCRIMINATOR DELUXE MODEL	Extremely sensitive to breaking and entering sound, but will not trigger on random external noise. Complete with control to adjust to maximum security External jack provides for remote location of m microphone. 1 2-volt negative ground operation.
95-838 BLINKING INDICATOR LIGHT	Easy 3-wire hookup. Wires to all cars, boats, etc. Simulates alarm system present. Cheapest deterrent against theft.
95-841 MEMORY LIGHT CIRCUIT	LED will light up after a break-in or when a false alarm has occurred. LED will remain on even after alarm has shut down and reset. Connects to all alarm systems requiring 6-12 Vdc operation, panel mounting.
95-876A CB ALTERNATOR AND AUTO STEREO NOISE ELIMINATOR KIT 7 AMP MODEL	RF choke and capacitor design. Helps eliminate unwanted alternator and general ignition noise such as alternator whine, popping caused by plugs or distributor. Easy to install. Complete with instructions.
95-851 GENERATOR-ALTERNATOR NOISE FILTER	A must for CB'ers and Hams- reduces unwanted noise interference caused by auto generator or alternator. Easy to install. Frequency Range: 3 to 30 mcs. Maximum Current: 25 amps.

95 Series Security Systems & Accessories

95 Series
Security Systems & Accessories