|
|
| BULBS FOR 40-720 T0 40-748 | |
|
40-715 40-716 40-717 |
6 Volt Bulb 12 Volt Bulb 28 Volt Bulb |
|
SPDT Mounting Depth 1 5/8" |
|
|
40-720 40-721 40-722 40-723 |
Red Green Yellow White |
|
DPDT MOMENTARY OPERATION Mounting Depth 1 15/16" |
|
|
40-735 40-736 40-737 40-738 |
White Red Green Yellow |
|
DPDT Mounting Depth 1 15/16" |
|
|
40-725 40-726 40-727 40-728 |
Red Green Yellow White |
|
SPDT ROUND LENS Mounting Depth 1 5/8" |
|
|
40-740 40-741 40-742 40-743 |
White Red Green Yellow |
|
SPDT MOMENTARY OPERATION Mounting Depth 1 5/8" |
|
|
40-730 40-731 40-732 40-733 |
Red Green Yellow White |
|
DPDT ROUND LENS Mounting Depth 1 15/16" |
|
|
40-745 40-746 40-747 40-748 |
Red Green Yellow White |
|
SPST ROCKER SWITCHES WITH LED (SWITCH CONTACTS RATED 5 AMP-125 VAC) Easy Snap-in mounting. Hole size 3/4" x 1/2". |
|
|
40-710 40-711 40-712 |
Orange Light Red Light Green Light |
|
LED ROCKER SWITCHES Rated 10 Amp, 125 volt, built-in LED light for eye-catching indication. Snap-in mounting eliminates mounting hardware. Body size: 1 1/16" x 7/16" x l 1/8" deep (including pins). External limiting resistor required. |
|
|
40-590 40-591 |
SPST Red LED SPST Green LED |
|
40-635 ILLUMINATED ROCKER SWITCH SPST, bulb-in neon built. Rated 10 Amp, 125 volt. Bulb operates on 117 AC line. Has built-in resistor, 1 1/4" x 5/8" top dimensions. |
|
40-635A 12 volt version of 40-635. |
|
LED TOGGLE SWITCHES 3 Amp, 125 Vac, attractive slim, cylindrical handle, with built-in LED indicator light in the tip. Solder-type terminals. Body size: 3/4" x 1/2" x 11/16" deep (including pins). Bushing size: 7/16". External limiting resistor required. |
|
|
40-593 40-594 |
SPDT Red LED SPDT Green LED |
| HEAVY DUTY 20 AMP (125V) SWITCHES Mounts in 1/2" hole. Bushing size: 15/32" dia. x 3/8" long. Body size: 1 1/8" x 5/8" x 1 " deep. | |
|
40-560 40-561 |
SPST (On-Off) SPDT (On-Off-On) Center Off |
|
HEAVY DUTY 20 AMP (125V) SWITCHES Mounts in 1/2" hole. Bushing size: 15/32" dia x 3/8" long. Body size: 1 5/16" x 3/4" x 1 " deep. |
|
|
40-562 40-563 |
DPDT (On-On) (On-Off-On) Center Off |
|
40-600 TOGGLE SWITCH SPST bakelite case, bat handle with chrome on/off plate. Solder-type terminals. Rated 3 Amp,125 volt. Size: 1 1/4" x 9/16" x 1 " deep to top of 7/16" bushing. |
|
40-601 TOGGLE SWITCH Same as 40-600 except as follows: DPDT. Size: 1 1/8" x 3/4" x 1 1/4" deep to top of 7/16" bushing. |
|
40-602 HEAVY DUTY CENTER OFF TOGGLE SWITCH DPDT center-off, rated 6 AMP, 125 volt, bat handle, red and black on/off plate. Screw terminals. Size: 1 3/8" x 3/4" x 1 3/8" deep, mounts in 7/16" hole. |
|
HEAVY DUTY TOGGLE SWITCHES Fast snap action toggles. Extremely smooth operation. Flat chrome handle. Rate 6 Amp, 250 volt. Silver contact. Specify type. Both mount in 1/2" hole. Bushing size: 15/32" dia. x 3/8" long. |
|
|
40-605 40-606 |
SPST 1 1/8" x 5/8" x 7/8" DPDT 1 1/8" x 3/4" x 7/8" |
|
40-619 DPDT BATON HANDLE SWITCH For new, modern equipment. |
|
|
Specifications Mounting Centers Handle Length Body Size Power |
1 5/32" 13/16" 15/16" L x 9/16" x 7/8" 0.3A at 125 Vac |
|
40-691 HEAVY DUTY TOGGLE SWITCH SPST 6 Amp, 125 Vac. Body size: 1 1/8" x 5/8" x 7/8" deep. Screw terminals. Mounts in 1/2" hole. 40-692 DPDT 6 Amp, 125 Vac. Body size: 1 15/16" x 3/4" x 3/4". Screw terminals. Mounts in 1/2" hole |
|
MINIATURE FLAT TOGGLE SWITCH SERIES Specially designed for decorative appearance with ease in smooth switching operation in mind. Specify part number. Specifications Contact rating: 6 Amp-125 Vac, 3 Amp-250 Vac. Bushing: 1/4". Thread length: 5/16" All necessary mounting hardware included. |
|
|
40-580 40-581 40-582 40-583 40-584 |
SPDT On-On SPDT On-(On) Momentary SPDT On-Off-On SPDT On-Off-On) Momentary SPDT (On)-Off-lOn) Mom. |
|
Body Size 40-580 thru 40-584: 1/2" x 5/16" x 1/2" deep including terminals |
|
|
40-585 40-586 40-587 40-588 40-589 |
DPDT On-On DPDT On-(On) Momentary DPDT On-Off-On DPDT On-Off-(On) Mom. DPDT (On)-Off-(On) Mom. |
|
Body Size 40-585 thru 40-589: 1/2" x 1/2" x 1/2" deep including terminals. |
|
|
Right angle mounting - 5/16" long threaded bushing. Contact rating 6 Amp, 125 Vac. All mount in 1/4" hole. |
|
|
40-500 40-501 |
SPDT On-On On-Off-On |
| Body Size: 1/2" x 5/16" x 1/2" deep including terminals | |
|
40-502 40-503 |
DPDT On-On DPDT On-Off-On |
| Body Size: 1/2" x 1/2"x 3/4" deep including terminals | |
|
Printed circuit mounting- 5/16" long threaded bushing. Contact rating 6 Amp,125 Vac. All mount in 1/4" hole. |
|
|
40-520 40-521 |
SPDT On-On SPDT On-Off-On |
| Body Size: 1/2" x 5/16" x 11/16" deep including terminals | |
|
40-522 40-523 |
DPDT On-On DPDT On-Off-On |
| Body Size: 1/2- x 1/2" x 11/16" deep including terminals | |
| SUB-MINIATURE TOGGLE SWITCHES |
|
40-610 SPDT,10 Amp, 125 volt (non-inductive load), solder-type
terminals. Body size: 5/16" x 1/2" x 9/16". |
|
40-611 DPDT,10 amp, 125 volt (non-inductive load), solder-type
terminals. Body size: 1/2" x 1/2" x 1/2". |
|
40-612 DPDT, center off. Contact 5 Amp, 125 volt current
cap. AC (noninductive load). Body size: 1/2" x 1/2" x 1/2". |
|
3 Amp, 125 Vac. Chrome handle with red tip for eye-catching indication. 3/16" dia. Bushing: 7/32" long. |
|
40-608 SPDT Body size: 5/16" x 3/16" x 1/2" deep (including terminals) |
|
40-609 DPDT Body size: 5/16" x 5/16" X 1/2" deep (including terminals) |
|
Vertical mounting - 5/16" long threaded bushing. Contact rating 6 Amp, 125 Vac. All mount in 1/4" hole. |
|
|
40-510 40-511 |
SPDT On-On SPDT On-Off-On |
| Body Size: 1/2" x 5/16" x 7/8" deep including terminals | |
|
40-512 40-513 |
DPDT On-On DPDT On-Off-On |
| Body Size: 1/2" x 1/2' x 7/8" deep including terminals | |
|
3A-125 Vac, mount in 1/4" hole size, solder terminal. 5/16" long threaded bushing. |
|
|
40-566 40-567 |
SPDT On-On SPDT On-Off-On |
| Body Size: 1/2" x 5/16" x 5/8" deep including terminals | |
|
40-568 40-569 |
DPDT On-On DPDT On-Off-On |
| Body Size: 1/2" x 1/2" x 5/8" deep including terminals | |
|
Extra small in size, chrome handles with red tip for quick eye-catching indication, 3 Amp, 125 Vac. |
|
|
40-613 SPDT Body size: 7/16" x 1/4" x 9/16" deep (including terminals). |
|
|
40-614 DPDT Body size: 7/16" x 7/16" x 9/16" deep (including terminals). Bushing: 1/4" dia x 1/4" long. |
|
|
|
|
|
40-699 40-700 |
3PDT 3/4" x 1/2" x 5/8" 4PDT 7/8" x 1/2" x 9/16" |
|
LEVER SWITCHES 6 Amp, 125 Vac, mounts in 3/4" round hole. |
|
|
40-705 40-706 |
DPDT SPDT |
|
MINIATURE SLIDE SWITCHES Used where size is necessary. Rated 0.25 Amp, 125 volt. |
|
|
Specify size. 40-622 40-623 |
SPDT Mtg. Centers 11/16" DPDT Mtg. Centers 3/4" |
|
ROCKER SWITCHES 6 Amp, 125 Vac, mounts in 3/4" round hole. |
|
|
40-707 40-708 |
SPDT DPDT |
|
HEAVY DUTY PUSHBUTTON SWITCH PUSH ON/PUSH OFF 10 Amp, 125 Vac. Mounting hole size 15/32"- 1/2" thread length. |
|
|
40-595 40-596 |
SPDT 1 1/8" x 5/8" x 3/4" DPDT 1 1/8" x 3/4" x 7/8" |
|
40-630 SPST ROCKER SWITCH Molded plastic, encased with mounting flanges. Size mounting centers: 1 3/16" x 1/2" x 7/8". Rating: 3 amps, l25 volts AC. |
|
40-615 SPDT MINIATURE PUSHBUTTON SWITCH Push-on/push-off, 3 Amp, 125 Vac. Hole size 1/4". 1/4" x 15/32" x 7/8" L including terminal. |
|
40-632 SPDT ROCKER SWITCH Molded plastic, encased with mounting flanges. Size mounting centers: 1 1/8" x 5/8" x 7/8". Rating: 3 amps, l25 volts AC. |
|
40-616 DPDT MINIATURE PUSHBUTTON SWITCH Same as 40-615. 7/16" x 15/32" x 7/8" L - including terminal . |
|
ROCKER SWITCHES 6 Amp, 125 Vac, mounts in 3/4" round hole. |
|
|
40-687 40-690 |
DPDT SPDT |
|
40-626 SUB-MINIATURE MOMENTARY SWITCH SPST PUSH TO MAKE 0.5 Amp,125 Vac. Fits 3/16" hole, 1/4" dia, length 13/16". |
|
40-620 SLIDE SWITCH DPDT, positive action. Size: 1 3/8" x 1/2". Mounting centers: 1 1/8". Rated 0.5 Amp,125 volt. |
|
SPST momentary, push to make. Rated 3 Amp, 125 volt. Specify color. Hole size: 5/8". |
|
|
40-627 40-629 40-628 |
Black Green Red |
|
40-621 CENTER-OFF SLIDE SWITCH Same as the 40-620 except for center-off position. |
|
|
|
|
40-636 40-637 |
Push to Break-Black Push to Make-Red |
|
40-685 40-686 |
Push-off Black Cap Push-on Red Cap |
|
1 Amp, 125 Vac. Mounting hole: 1/2" Overall length: 3/4". |
|
Rated 3 Amp, 250 Vac. Bushing: 7/16". Hole size: 1/2". |
|
|
40-689 |
SPST Push-on-Cream |
|
SPDT MICRO SWITCH Leaf-type, normally open or normally closed momentary contact. 1/2 Amp, 125 Vdc; 5 Amps, 1/6 h.p., 125 or 250 Vac. Body size: 1 1/8" x 5/8" x 3/8" not including contacts. |
|
Rated 3 Amp, 125 Vac. Mounting hole: 1/4" Body size: 7/16" x 7/16" x 11/16". Normally open or normally closed. |
|
|
40-693 40-694 |
Red Black |
|
MICRO-MINIATUREPUSHBUTTON KEYBOARD SWITCH |
|
|
Rating Contact resistance Voltage breakdown Life expectancy Dimensions |
50 mA at 12 Vdc 100M ohms Max. 100 Vac/minute 100,000 cycles 1/4" x 1/4" x 5/16" Deep |
|
SPST MOMENTARY PUSH TO MAKE 1 Amp, 125 Vac. Overall length: 1 1/8" Mounting hole: 1/4". |
|
Sensitive, lightweight, fully encased. Pin type terminal leads for easy connection on printed circuit boards. 3 Amp contacts. Size: 5/8" x 3/4" x 29/32". Specify model number. |
|
|
40-675 40-674 |
6v SPDT, resistance 100 ohms, current 60 mA 12V SPDT, resistance 350 ohms, current 34 mA |
|
SOCKET INCLUDED. General purpose plug-in type. Excellent for chassis or printed circuit board mounting. Lightweight, fully encased Amp contacts. Size (less socket): 3/4" x 15/16" x 1". |
|
|
Specify model number. 40-676 40-677 |
6v DPDT, resistance 80 ohms, current 75 ma 12V DPDT, resistance 250 ohms, current 48 mA |
|
12 VOLT SPDT RELAY Resistance 5K. Current 1.5 mA. Contact Rating: 500 mA. |
Misc. Switches |
|
40-640 AUDIO SELECTOR An audio selector connecting to a total of four sets of CD players, audio amplifiers, cassette decks, etc. By changing front panel switches, one audio source among others can be reproduced. RCA jacks on rear panel. |
|
40-643 TAPE DECK SELECTOR SWITCH Designed for use with 2 tape recorders. Now makes it possible to switch record, intermix recording or playback functions at ease without continuous connecting and reconnecting your audio cables. RCA jacks on rear panel. |
|
40-641 AUDIO/VIDEO SELECTOR A stereo type audio/video selector, connecting a total of four sets of video decks and video disk players to one television set. Therefore enabling the viewer to select the screen of his choice on one television. 75 ohm term. - 30 db isolation. RCA jacks on rear panel. |
|
40-651 FOOT SWITCH Push to make, can be reversed. Used for remote operation. Metal case has slip-proof bottom,60-inch lead, has 2.5 mm plug. Size: 3" x 3" x 1 1/8". Ratings: 0.5 amp, 125 volts AC. |
|
40-642 STEREO SPEAKER SELECTOR Selects up to four pairs of speakers for one amplifier. 60 watts maximum. Push terminals on rear panel. |
|
40-644 STEREO SPEAKER SELECTOR SWITCH Will switch up to 6 individual sets of speakers for stereo or monaural use. Complete with loading resistors for amplifier protection. 7" x 3 5/8" x 2 3/8". 50 watts. RCA jacks on rear panel. |
|
40-645 STEREO SPEAKER SELECTOR Selects up to six pairs of speakers and has an AMP switch (A+B) which switches between two separate amplifiers for different signal feeds. Uses load impedance matching transformers. Heavy duty push to connect terminals for 8-22 gauge wire on rear panel. |
|
40-695A A/B PUSHBUTTON VIDEO SWITCHER Allows single input or output to be connected to any one of two lines at the press of a finger and with negligible loss. |
|
40-646 STEREO SPEAKER DISTRIBUTION BOX Ideal for large installations that require multiple speaker hook-ups, paging, background music. Output to eight pairs of speakers from one amplifier. Unit fits into a standard 19" rack system. Push terminal connectors. |
|
40-696 A/B/C PUSHBUTTON VIDEO SWITCHER RF switcher allows single input or output to be connected to any one of three lines at the press of a finger and with negligible loss. |
Security Switches |
|
FOR MORE SECURITY PRODUCTS PLEASE CALL AND REQUEST OUR SECURITY
CATALOG Call (213) 465-2131 |
|
MAGNETIC CONTACT SWITCHES Versatile used in many alarms sensing for window and door protection Specify either normally open or normally closed. Mounting center: 2 1/8" 130V max. 50 mA or 10 watts Up to 1/2 Amp max. |
|
|
40-656 40-657 |
Normally Closed Normally Open |
| (Both with magnet in place.) | |
|
40-659 FLUSH MOUNT CONTACT SPST normally closed with magnet in place. Circuit opens when magnet is removed. Recesses into 1/4" hole. Brackets are provided for mounting in aluminum window or sliding glass doors etc. 0.5 amps 125V. |
|
SURFACE MOUNT CONTACTS Includes terminal cover. 3/4 operating gap Available in gray, brown and white. |
|
|
40-750 40-751 |
Normally Closed Normally Open |
| (Both with magnet in plate.) | |
|
40-756 STUBBY RECESSED CONTACT 5/8 long switch and for tight installations. Normally closed with magnet in place. Available in brown and off white. |
|
40-752 WIDE GAP SURFACE MOUNT CONTACT Used for loose Fitting doors and windows. 2 3/4" operating gap. Includes spacers. Normally closed with magnet in place. Color is gray. |
|
40-755 3/8" RECESSED CONTACT Switch/magnet case with ribs for securing in holes 1" operating gap. Closed circuit with magnet in place. Available in gray brown and white. |
|
SELF-ADHESIVE CONTACTS Alarm switches for window and door protection with 12" wire leads. 1 1/2" length 3/8" Wide. 0.5 amp 125v. |
|
|
40-665 40-666 |
Closed Circuit w/magnet in place Open Circuit w/ magnet in place |
|
40-655 WATER SENSING CONTACT SWITCH Operates as a normal contact switch in an alarm system. When it senses water (or any conductive liquid) it acts as a magnetic contact. |
|
40-753 SURFACE MOUNT CONTACT Screws or foam tape mounting. 15 prewired leads. Closed circuit with magnet in place. Available in gray brown and white. |
|
40-759 MERCURY MOTION SENSOR Switch cycle: 100 000 at 12 VDC, 0.5 A. Ratings: 1.5-12 VDC., 3 amps. 15 degree switch gradient. 2 L x 3/8" W x 3/8" H. 15" leads. 1.57" mounting centers. Brown color. |
|
RECESSED MAGNETIC SWITCH Complete concealment positive action easy to install recesses into 3/8" hole. 0.5 amp - 125V. |
|
|
40-660 40-661 |
Normally Closed Normally Open |
| (Both with magnet in place.) | |
|
40-668 MAGNETIC FLOOR SWITCH Extra wide gap. Magnetic contacts embedded in solid aluminum block. Switch wires protected in a flexible steel jacket. Special closed circuit contacts. Size: 5/8" x 1 1/4" x 3 1/2" L. Normally closed with magnet in place. 130Vdc 0.050 amp 1 amp 125Vac. 2" operating distance. Alnico magnet. |
|
40-658 OVERHEAD DOOR CONTACT Heavy duty, wide gap, 24" wire leads enclosed in stainless steel cable. Closed circuit with magnet in place. 1 amp - 125V, 130Vdc - 50mA contact rating. |
|
40-650 EMERGENCY PANIC SWITCH 3 " long, 7/8" wide, 2 5/8" mounting centers. Normally open circuit. |
|
40-664 VIBRATION SWITCH Shock switch for protection of window glass, walls, showcase, etc. Normally closed circuit. Size: 2 3/8"L x 7/8" W x 9/16" H. |
|
40-673 PLASTIC NYLON HOLDER Used for recessed mounting of contacts and magnets on steel doors. Holds magnet or contact in place away from frame. For use with our 40-059 contact, magnet. Hole size 3/4". Color is grey. |
|
40-667 RECESSED PLUNGER SWITCH Positive action, easy to install, tapered body for tight fit, mounts in 3/8" hole. Normally closed circuit. Adjustable plunger. |
|
40-672 ALUMINUM Z-BRACKET Needed for extending magnet greater distances when uneven surfaces exist. Used for 40-750,751,752. |
|
BALL PLUNGER Completely environmental proof for window, door protection, etc. Mounts in 3/4" hole. Mounting centers 1 3/16". |
|
|
40-670 40-671 |
Normally Closed Normally Open |
| (Both with ball depressed.) | |
|
SPST KEY SWITCHES Sometimes called shunt lock. Complete with 2 keys andmounting hardware. Used withmost alarm equipment and withall CALRAD Alarm Modules. |
|
|
40-663 40-663-HS |
Single Sided Double Sided |
|
40-654 TAMPER SWITCH SPST momentary contact. Use in conjunction with most security devices. Normally closed (with plunger depressed). |
|
ROUND SECURITY KEYLOCK SWITCHES Mounts in 3/4" hole. 1 11/16" deep. 3 amp - 125V. |
|
|
40-682 40-683 |
SPST Momentary Spring Return SPST Shunt On/Off |
|
40-652 HOLD-UP UNIT Double button operation virtually eliminates accidental triggering. Sturdy metal case, silver plated SPST contacts. Prewired for quick installation. Color beige, contacts rated for 1 amp at 50vdc. |
| METAL DOOR PIN SWITCHES. | |
|
40-662 40-771 40-772 |
STRAIGHT RIGHT ANGLE STRAIGHT LONG |
| For use in automotive security. | |
|
|